Description

Delivery & Setup to your backyard *electrical not included

  1. Delivery technicians will position the hot tub according to your preferred location.
  1. They will install the Lift N’ Store or Lift N’Store Plus; depending on the lift purchased.
  1. Technician will connect all the plumbing.
  1. Home owner will have a certified electrician complete the electrical work and connect

the wires to the hot tub control box. PLEASE DO NOT TURN ON THE TUB.

  1. Begin filling the hot tub with water after electrical connections are made.
  1. Once the level of water passes the filter compartment (may take 1-2 hours), you can

supply power to the hot tub.

  1. Wait 3 to 5 minutes until the hot tub initializes. PLEASE DO NOT TOUCH ANY BOTTONS

ON THE CONTROL PANEL OR ADJUST ANY SETTINGS – everything is

preset by Beachcomber and customer does not need to make any changes.

 

  1. Keep the cover on – wait and monitor the control panel after an hour to ensure water

temperature is increasing (will stop at 102 degrees).

 

  1. Once the temperature reaches above 80 degrees, please contact us to schedule a

date and time to be onsite to help with the “Startup” chemical procedures and review

the details of your new hot tub (please have available the check-list provided in your

manual).